HP EVA Array iSCSI Connectivity Option - Manual (Page 155)

Authority Admin session
Syntax
set iscsi [<port_num>]
Parameters
port_num
: The number of the iSCSI port to be configured.
Examples The following is an example of the set iscsi command:
mpx100 (admin) #> set iscsi
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
WARNING:
The following command might cause a loss of connections to both ports.
Configuring iSCSI Port: 1
—————————
Link Rate (0=Auto, 1=10Mb, 2=100Mb, 3=1Gb) [Auto ]
IP Address [0.0.0.0 ]
Subnet Mask [0.0.0.0 ]
Target TCP Port No. (Min=1024, Max=65535) [3260 ]
MTU Size (Min=582B, Max=9000B) [1500 ]
TCP Max Window Size (Min=8192B, Max=32768B) [32768 ]
Header Digests (0=Enable, 1=Disable) [Disabled ]
Data Digests (0=Enable, 1=Disable) [Disabled ]
Window Scaling (0=Enable, 1=Disable) [Disabled ]
BiDi Discovery Chap (0=Enable, 1=Disable) [Disabled ]
Max Burst (Min=512B, Max=262144B) [262144 ]
Max First Burst (Min=512B, Max=32768B) [32768 ]
All attribute values for Port 1 that have been changed will now be saved.
Configuring iSCSI Port: 2
—————————
Link Rate (0=Auto, 1=10Mb, 2=100Mb, 3=1Gb) [Auto ]
IP Address [0.0.0.0 ]
Subnet Mask [0.0.0.0 ]
Target TCP Port No. (Min=1024, Max=65535) [3260 ]
MTU Size (Min=582B, Max=9000B) [1500 ]
TCP Max Window Size (Min=8192B, Max=32768B) [32768 ]
Header Digests (0=Enable, 1=Disable) [Disabled ]
Data Digests (0=Enable, 1=Disable) [Disabled ]
Window Scaling (0=Enable, 1=Disable) [Disabled ]
BiDi Discovery Chap (0=Enable, 1=Disable) [Disabled ]
Max Burst (Min=512B, Max=262144B) [262144 ]
Max First Burst (Min=512B, Max=32768B) [32768 ]
All attribute values for Port 2 that have been changed will now be saved.
Set iSNS command
Configures iSNS parameters for an iSCSI port.
EVA iSCSI connectivity user guide 155