HP EVA Array iSCSI Connectivity Option User Manual
Page 84
NOTE:
The iSCSI connection is not initiated until the discovery method is enabled.
For more details on using the iscsiadm command, see the #man iscsiadm man pages. For more
details on iSCSI Initiator setup, see Sun Microsystems System Administration Guide, Devices and File
Systems, Section 15.
Creating an iSCSI host and virtual disks for the Solaris iSCSI Initiator
See
Using HP Command View EVA to configure LUNs to iSCSI initiators
, page 129, to create an iSCSI
host entry and to present LUNs to an iSCSI host in HP Command View. The host mode setting for
Solaris is Linux/Mac.
Command View 6.0.2 and 7.0 only—Remove LUN 0 from the Solaris iSCSI
Initiator using the CLI
By default HP Command View 6.0.2 and 7.0 will assign LUN 0 to each iSCSI Initiator that is presented a
virtual disk. Because the Solaris iSCSI Initiator does not recognize LUN 0 as the EVA controller console
LUN the initiator will try to bring LUN 0 online resulting in the following warning:
Mar 21 08:04:09 hdxs8j iscsi:
[ID 248668 kern.warning] WARNING:
iscsi driver unable to online iqn.1986-03.com.hp:fcgw.mpx100:hdxh05-
m2.0.50001fe1500aef60.50001fe1500aef68 LUN 0
To remove LUN 0 from the Solaris iSCSI Initiator using the CLI:
1.
Use telnet to connect to the mpx100/100b management port, or connect to the mpx100/100b serial
port using the HP-supplied connector.
The mpx100/100b management port’s default IP address is 10.0.0.1/255.0.0.0. The mpx100/100b
serial port’s default setting is 115200/8/n/1.
2.
To log in, type:
• User name: guest
• Password: password
3.
To enable administrator privileges, type:
• admin start
• config
4.
Type the command:
LUNmask rm
Follow the prompts to remove the Solaris iSCSI Initiator from each iSCSI presented target.
For example:
> telnet 10.6.7.65
login:
guest
password:
password
>admin start
password:
config
mpx100 (admin) #> LUNmask rm
Index (WWNN,WWPN/iSCSI Name)
— ——— —————————————
0 50:00:1f:e1:50:00:2f:70,50:00:1f:e1:50:00:2f:7e
84
Setting up the iSCSI Initiator and storage