HP EVA Array iSCSI Connectivity Option - Manual (Page 145)

Authority Admin session only to set
Syntax fru
restore
save
Keywords
restore
: The FRU restore command requires that the user first ftp the tar
file containing the desired configuration to the mpx100/100b. When this
command is issued, it prompts the user for the restore level. The user has the
option of fully restoring the mpx100/100b configuration (all configuration
parameters and LUN mappings) or restoring only the LUN mappings. The
restored configuration does not take effect until the mpx100/100b is rebooted.
save
: The FRU save command creates a tar file containing the mpx100/100b’s
persistent data, configuration, and LUN mappings, and stores the file in the
mpx100/100b /var/ftp directory. The user must then ftp the bin file from the
mpx100/100b.
Examples The following is an example of the fru command:
mpx100/100b (admin) #> fru restore
A list of attributes with formatting and current values follows.
Enter a new value or press Enter to accept the current
value. If you wish to terminate this process before reaching the end of
the list press 'q' or 'Q' and Enter.
Type of restore (0=full, 1=mappings only) [full]
FRU restore completed.
Reboot the system for configuration to take effect.
The following is an example of the FRU Restore Save command:
mpx100 (admin) #> fru save
FRU save completed. Configuration File is HP_Storageworks_FRU.bin
Please use FTP to extract the file out from the System.
Help command
Displays a list of the CLI commands and their syntax.
EVA iSCSI connectivity user guide 145