HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 130)

http://www.hp.com/go/clj9500mfp
114 Chapter 5 – Printing Rev. 1.0
To store a print job on the hard-disk accessory, select the Stored Job option in the printer driver.
Note The MFP must have a hard disk installed in order to use this feature.
To print a stored job
You can print a job that was stored on the hard-disk at the MFP control panel.
1 Press the M ENU button.
2 Scroll to and touch R ETRIEVE J OB .
3 Scroll to and touch U SER N AME .
4 Scroll to and touch your job.
5 To print the default number of copies, touch C ONTINUE . When the screen changes, you are prompted to enter the
number of copies that you want printed. To change the number, use the numeric keypad or scroll to select a new
number, and touch
O K .
If PRINT has next to it, the job is a private job and requires a PIN. See “Private jobs” on page 112.
To delete a stored job
Jobs that are stored on the hard-disk can be deleted at the MFP control panel.
1 Press the M ENU button.
2 Touch R ETRIEVE J OB .