HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 223)

ENWW Managing supplies 207
1
8
13 Using one hand to support the underside of the roller, turn the roller to a 45°
angle and align the roller with the slot. Slide the roller into the slot until it
stops completely.
14 Swing the green lever up. Close all of the doors.
Note
If the lever does not move freely, make sure that the transfer roller and the
transfer belt are pushed into the MFP completely.
15 On the right side of the MFP, pull the blue tab to remove the old filter from
the slot.
13
14
15