HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 250)

http://www.hp.com/go/clj9500mfp
234 Chapter 8 – Managing and maintaining Rev. 1.0
Cleaning the fuser input
Occasionally, toner and paper dust collects in the fuser input and can affect print
quality. Use the following procedure to clean the fuser input.
1 Open the front doors of the MFP, and then swing the large green lever
down.
2 On the front side of the MFP, locate the blue transfer-roller handle beneath
the large green lever. Grasp the handle and pull the roller out of the MFP.
Set the roller on a clean, flat surface.
CAUTION
Do not touch the black foam roller, and be careful not to scratch the
underside of the image transfer belt as you remove the roller from the MFP.
3 Remove the green tongs and blue brush that are mounted on the inside of
the right front door.
1
2
3