HP Color LaserJet 9500 Multifunction Printer series User Manual
Page 36
Advertising
20 Chapter 1 – MFP basics
Rev. 1.0
11
To change the type setting, touch the correct paper type. The message
SETTING SAVED
is displayed for a moment, and then the size and type
settings are displayed.
Note
If you are using media that is lighter or heavier than 75 g/m² to 105 g/m² (20
to 28 lb), or if you are using coated media or transparencies, set the media
type for the tray.
12
If the size and type settings are correct, touch
E
XIT
to accept the settings.
The tray is ready to use.
Advertising