HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 251)

ENWW Cleaning procedures 235
1
8
4 Slide the open end of the brush onto the tongs until it snaps into place.
5 Hold the tongs so that the brush is at a 45° angle and align the brush with
the transfer roller slot. Insert the brush into the slot.
6 Slide the brush into the transfer roller slot until it stops, and then slide the
brush toward you until the brush is almost out of the transfer roller slot.
CAUTION
Do not pull up or sideways on the brush. Push and pull the brush straight in
and out of the MFP.
7 Repeat step 6 three times, and then remove the brush from the MFP.
4
5
6