Image transfer kit – HP Color LaserJet 9500 Multifunction Printer series User Manual
Page 218
202 Chapter 8 – Managing and maintaining
Rev. 1.0
Image transfer kit
The image transfer kit contains the following parts: the transfer roller, the transfer belt, one filter, one toner wipe, two small
tray rollers, and seven large tray rollers.
The image transfer kit should be replaced after every 200,000 pages of printing. When the counter reaches 200,000 pages,
the MFP stops printing until the kit is replaced and the count is reset at the control panel.
Hewlett-Packard Company recommends that you place an order for a replacement image transfer kit when the
ORDER
TRANSFER KIT
message first appears on the control-panel display.
The part number for the image transfer kit for the HP Color LaserJet 9500mfp is C8555A.
To order an image transfer kit, see “Ordering supplies” on page 188.