HP Color LaserJet 9500 Multifunction Printer series User Manual
Page 234
218 Chapter 8 – Managing and maintaining
Rev. 1.0
13
Reattach the finishing device.
14
Do one of the following:
If
NEW CLEANING KIT
appears on the control-panel display, use the Up arrow
or the Down arrow to scroll to
YES
, and then touch
O
K
. The kit life count is
automatically reset.
If
NEW CLEANING KIT
does not appear, press the
M
ENU
button. Use the Up
arrow or the Down arrow to scroll to
CONFIGURE DEVICE
, to
RESETS
, and then
to
RESET SUPPLIES
. Scroll to
NEW CLEANING KIT
, and then select
Y
ES
to
reset the count.
Note
If you select
NO
or do not make a selection, and the cleaning kit is at
maximum life, the MFP remains offline until you replace the kit and select
YES
.
15
Pack and seal the used parts in the packaging from the new ones. For
recycling information, see the recycling guide that is included with the new
image cleaning kit.
13
15
14