HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 44)

http://www.hp.com/go/clj9500mfp
28 Chapter 1 – MFP basics Rev. 1.0
To set a standard size for tray 2, tray 3, and the 2,000-sheet side input tray
(tray 4)
The MFP automatically detects the size that is loaded, so you do not need to set the size manually.
To set or change a custom size for tray 2 and tray 3
1 Make sure that the switch inside the tray that you want to configure is in the Custom position.
2 A message on the control panel prompts you to specify the paper size.
3 Touch the appropriate unit of measure ( M ILLIMETERS or I NCHES ). (The default is M ILLIMETERS because the marks on
the tray guides are in millimeters.)
4 Use the numeric keypad to specify the tray X (front-to-back) dimension.
5 Use the numeric keypad to specify the tray Y (left-to-right) dimension.
6 Touch E XIT to exit the menus.