HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 222)

http://www.hp.com/go/clj9500mfp
206 Chapter 8 – Managing and maintaining Rev. 1.0
10 Move one hand to the front-center of the belt, and then slide the belt
completely into the MFP. Close the right door.
Note
If the right door does not close, make sure that the transfer belt is pushed
completely into the MFP.
11 On the front side of the MFP, locate the blue transfer-roller handle beneath
the large green lever. Grasp the handle and pull the used roller out of the
MFP.
12 Unpack the new roller and set it on a clean, flat surface. Carefully remove
the protective sheet.
CAUTION
Do not touch the black foam roller, and be careful not to scratch the
underside of the belt as you insert the roller into the MFP.
10
11
12