HP Color LaserJet 9500 Multifunction Printer series User Manual
Page 239
Advertising
ENWW
Managing supplies 223
1
8
10
If
NEW FUSER KIT
appears on the control-panel display, use the Up arrow or
the Down arrow to scroll to
YES
, and then touch
O
K
. The kit life-count is
automatically reset.
11
If
NEW FUSER KIT
does not appear, press the
M
ENU
button to open the
menus. Use the Up arrow or the Down arrow to
CONFIGURE DEVICE
, to
RESETS
, and then to
RESET SUPPLIES
. Scroll to
NEW FUSER KIT
, and then
select
Y
ES
to reset the count.
Note
If you select
N
O
or do not make a selection, the MFP remains offline until
you replace the kit and select
Y
ES
.
12
Place the used fuser in the packaging from the new fuser. For recycling
information, see the recycling guide that is included with the new fuser kit.
12
10
11
Advertising