HP Color LaserJet 9500 Multifunction Printer series User Manual
Page 228
212 Chapter 8 – Managing and maintaining
Rev. 1.0
28
If
NEW TRANSFER KIT
appears on the control-panel display, use the Up
arrow or the Down arrow to scroll to
YES
, and then touch
O
K
. The kit life-
count is automatically reset.
29
If
NEW TRANSFER KIT
does not appear, press the
M
ENU
button to open the
menus. Use the Up arrow or the Down arrow to scroll to
CONFIGURE DEVICE
,
to
RESETS
, and then to
RESET SUPPLIES
. Scroll to
NEW TRANSFER KIT
, and
then select
Y
ES
to reset the count.
Note
If you select
NO
or do not make a selection, the MFP remains offline until
you replace the kit and select
YES
.
30
Place the used parts in the packaging from the new ones. For recycling
information, see the recycling guide that is included with the new image
transfer kit.
30
28