Performing a scan (3dc multi-target configuration) – HP XP P9500 Storage User Manual
Page 179
Performing a Scan (3DC Multi-Target Configuration)
Perform a scan that includes the volumes to be defined in the copy group and the command device.
In a 3DC Multi-Target (Cnt Ac-S Z x Cnt Ac-J Z) configuration, perform a scan from each host
instead of a remote scan, ensuring that all the correct information is acquired (such as the device
number (Devn), because operations might be performed at each site.
For details on how to perform scans to acquire storage system information, see
.
To perform a scan from each host in a 3DC Multi-Target (Cnt Ac-S Z x Cnt Ac-J Z) configuration:
1.
Scan the primary site from the primary host.
2.
Scan the local site from the local host.
3.
Scan the remote site from the remote host.
4.
Transfer the scan results of each site to all other sites so that each site will have the scan results
from all sites.
Settings for Operations at the Primary Site (3DC Multi-Target Configuration)
To set operations at the primary site:
Defining a 3DC Multi-Target (Cnt Ac-S Z x Cnt Ac-J Z) configuration
179