HP XP P9500 Storage - Manual (Page 597)

Press F3=Exit to create the Path Set, F12=Cancel to cancel.
F1=Help F3=Exit F12=Cancel
4. Press the F3=Exit key.
A path set definition file is created and the path set ID appears in the Path Set Selection List
panel.
Path Set Selection List Row 1 to 1 of 1
Command ===>
Scroll ===> PAGE
2008/02/28 16:02:59
Supported actions: e(Edit), d(Delete)
AC Path Set ID ------------------------- Description --------------------
TESTPATH
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
Adding a logical path to a path set
For information about the data displayed in each ISPF panel, see the definition example in
Figure 130 (page 596) .
To add a logical path to the path set:
1.
Specify e in the AC column for the created path set ID, and then press the Enter key. The path
set definition file is loaded and the Path Set Detail panel displays.
Path Set Detail
Command ===>
Scroll ===> PAGE
2008/02/28 16:03:27
Supported actions: e(Edit), d(Delete)
Path Set ID . . . : TESTPATH
Description . . . . TEST
-------- Primary -------- ------- Secondary -------
AC Type SHR S/N PathID CU SSID Dir S/N PathID CU SSID
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F6=Sort F7=Backward F8=Forward
2. Press the F5=Add key.
The Edit Logical Path Definition panel displays.
3. Specify DKC for Type.
4. For SHR, specify Y when sharing the target path with other logical path definitions, specify N
when not sharing the target path.
If you do not specify anything, N is assumed.
5. Specify s in the AC column of the Primary line.
Edit Logical Path Definition
Command ===>
2008/02/28 16:03:38
Path Set ID . . . : TESTPATH
Description . . . : TEST
Creating a path set 597