Preparing, Operating procedure, During a – HP XP P9500 Storage User Manual
Page 398
3.
From the primary site, execute the YKMAKE command for the Continuous Access Journal Z
copy pair between the primary site and remote site 1.
•
YKQUERY
•
YKMAKE
•
YKEWAIT GOTO(DUPLEX)
Operation returns to normal.
Operating procedure during a storage system failure (with no information lost from
memory) at remote site 1 or 2
Perform the procedures below when a failure, with no information lost from memory, occurs at
remote site 1 or remote site 2 storage system is in a nonvolatile failure state.
The procedures below applies when a storage system failure occurs at remote site 1. If a storage
system failure occurs at remote site 2, replace remote site 1 with remote site 2 in the procedures.
Preparing
No action is required.
398 Maintenance and troubleshooting operations