HP XP P9500 Storage - Manual (Page 381)

7. From the primary site, execute the YKMAKE command for the Continuous Access Journal Z
copy pair between the primary site and remote site 2.
•
YKQUERY
•
YKMAKE
•
YKEWAIT GOTO(DUPLEX)
8. Resume operation at the primary site.
Operation returns to normal.
Performing storage system maintenance for remote site 1 or 2
The following are the procedures for storage system maintenance for remote site 1 or 2.
The procedures below apply when you perform storage system maintenance for remote site 1. To
perform maintenance for remote site 2, replace remote site 1 with remote site 2 in the procedure.
Using a 3DC Multi-Target (Cnt Ac-J Z x Cnt Ac-J Z) configuration 381