HP XP P9500 Storage - Manual (Page 376)

The bullet lists under the figures in the procedures show the commands that must be executed.
Performing primary site storage system maintenance
The following are the procedures for primary site storage system maintenance.
The procedure below applies when you perform a failover to remote site 1. To perform a failover
to remote site 2, replace remote site 1 with remote site 2 in the procedure.
Failover
1. Stop operation at the primary site.
2. From remote site 1, execute the YKDELETE command for the Continuous Access Journal Z
copy pair between the primary site and remote site 2.
•
YKQUERY
•
YKDELETE
•
YKEWAIT GOTO(SIMPLEX)
3. From remote site 1, execute the YKSUSPND REVERSE command for the Continuous Access
Journal Z copy pair between the primary site and remote site 1.
•
YKQUERY
•
YKSUSPND REVERSE
•
YKEWAIT GOTO(SUSPEND)
376 Maintenance and troubleshooting operations