HP XP P9500 Storage - Manual (Page 221)

Setting up for performing operations at the secondary site
1. Define a path set consisting of the following inter-disk controller logical paths on the secondary
host (or specify the logical paths by using Remote Web Console).
•
Remote storage system
→ Primary storage system
•
Remote storage system
→ Local storage system
2. Define the following route lists on the secondary host.
•
HSRT3
Remote storage system
→ Primary storage system
Remote storage system
→ Local storage system
3. Establish an inter-disk controller logical path on the secondary host.
Defining a 2DC configuration with HyperSwap and Cnt-Ac J Z 221