Settings for operations at remote site 2 – HP XP P9500 Storage User Manual
Page 195
Advertising
Settings for operations at remote site 2
1.
From remote host 2, create a path set consisting of inter-disk controller logical paths (Remote
2
→ Primary, and Remote 2 → Remote 1) (or use Remote Web Console to set up paths).
2.
From remote host 2, create a route list (Remote 2
→ Primary, and Remote 2 → Remote 1
routes).
3.
From remote host 2, establish inter-disk controller logical paths (Remote 2
→ Primary, and
Remote 2
→ Remote 1).
Defining a 3DC Multi-Target (Cnt Ac-J Z x Cnt Ac-J Z) configuration 195
Advertising