HP XP P9500 Storage User Manual
Page 181
Advertising
To see the procedure for loading and building a logical path, see
.
4.
From the primary host, register a command device for the storage system of the primary site,
local site, and remote site, in either of the following orders.
•
The primary site first, followed by the local site, and then the remote site
•
The primary site first, followed by the remote site, and then the local site
This creates the command device definition file.
For details on how to register a command device in a storage system, see
command device in a storage system” (page 639)
.
Settings for Operations at the Local Site (3DC Multi-Target Configuration)
To set operations at the local site:
Defining a 3DC Multi-Target (Cnt Ac-S Z x Cnt Ac-J Z) configuration
181
Advertising