Kenwood TM-D710GE - Manual (Page 14)

10
02 Preparations for Using APRS
PACKET SPEED
Select Menu 601 (APRS - INTERNAL TNC – DATA SPEED) and configure the packet data speed.
Fig. 2-7 Menu 601 (APRS ‑ INTERNAL TNC – DATA SPEED)
My Position
Using an External GPS Receiver
Select Menu 602 (APRS - GPS PORT) and configure the GPS terminal settings.
• Baud Rate: 4800 bps (same as GPS receiver)
• Input: GPS (for the GPS receiver)
• Output: OFF (when WAYPOINT, DGPS are not used)
Fig. 2-8 Menu 602 (GPS PORT) with GPS Receiver
Not Using an External GPS Receiver
Select Menu 602 (APRS - GPS PORT) and configure the GPS terminal settings.
• Input: OFF
Fig. 2-9 Menu 602 (GPS PORT) without GPS Receiver
Entering Your Position Manually when not Using the GPS Information
Select Menu 605 (APRS - MY POSITION) and configure your own station’s position.
• Name: Enter a familiar name for your location (HOME or etc.).
• Latitude: Enter the latitude value.
• Longitude: Enter the longitude value.