Kenwood TM-D710GE - Manual (Page 24)

20
03 GPS
Fig. 3-13 Menu 501 (SETUP2 ‑ SENTENCE)
Press the [SELECT] key to toggle between adding and deleting the sentence. The “*” mark appears to the left of the
added sentence. “$GPGGA” and “$GPRMC” cannot be deleted, as they are necessary for BEACON transmission and
satellite information displays.
To display the position information display, $GPGSV or $GPGSA should be selected.
Log Function (TM-D710GA/GE only)
The internal GPS unit on the TM‑D710GA/GE can retain up to 5,000 points of log data. Saved information includes
latitude, longitude, altitude, traveling direction, speed, time and date.
To start the log, press the [LOG] key.
While the log function is active, “LOG START” appears for 5 seconds, followed by the illuminated iLOG pictogram. (iLOG
pictogram blinks during the GPS positioning.) If the log is active while the internal GPS unit is inactive, the GPS unit also
becomes active automatically.
Fig. 3-14 LOG START Display
To stop the log, press the [LOG] key.
While the log function is active, “LOG STOP” appears for 5 seconds.
Fig. 3-15 LOG STOP Display
The available log record methods are “TIME”, “DISTANCE”, and “BEACON”. Select the record method that suits the
means of traveling you choose, the traveling distance and the environment of the location. For example, if there are many
turns, a correct logging may not be possible with “DISTANCE” and you should set to “TIME” instead. Conversely, when
you are forced to stay at the same place for a long time because of a traffic jam or for some other reason, “DISTANCE”
will be more efficient. Use Menu 503 (GPS - LOG SETUP - RECORD METHOD) to set the log record method.
“TIME” records the log with the time spacing specified in “INTERVAL”. The possible value of Interval is between 2 and
1800 seconds.
Fig. 3-16 If 10 seconds are configured for Interval