Kenwood TM-D710GE - Manual (Page 94)

90
08 MCP-2A/6A Memory Control Program
Fig. 8-13 MCP‑6A Open Window
The files in the table below can be imported into MCP-6A.
Table 8-5 MCP‑6A Importable File Formats Table
Software Name and Extension Transceiver Model
MCP‑5A (*.mc5) TH‑K20A/E, TH‑K40A/E
MCP‑4A (*.mc4) TH‑D72A/E
MCP‑2A (*.mc2) TM‑V71A/E, TM‑D710A/E
MCP‑1A (*.mcp)
TH‑K2AT/E/ET, TH‑K4AT/E
TM‑271A/E, TM‑471A, TM‑281A/E,TM‑481A
MCP‑F6/F7 (*.fx) TH‑F6A, TH‑F7A/E
MCP‑2000 (*.2k0) TS‑2000/X, TS‑B2000
MCP‑D700 (*.700) TM‑D700A/E
MCP‑D7G (*.d7g) TH‑D7A (G), TH‑D7A/E (G2.0)
MCP‑D7 (*.d7) TH‑D7A/E, TH‑D7E (Ver.2.0)
MCP‑G707 (*.707) TH‑G707A (K‑type)
MCP‑V7 (*.V7) TM‑V7A (K‑type)
MCP‑G71 (*.71) TM‑G71A (K‑type)
Only files created for K-type (U.S.A. and Canada) models can be imported into MCP-6A. The referenced software can
be downloaded from the following web site: http://www.kenwoodusa.com/Support/AMA_Radios/ .
Note:
◆ Memory channels that are outside of the receive frequency range of TM‑D710GA/GE cannot be read.
◆ With MCP‑6A, it is not possible to exchange data between above‑mentioned transceivers except TM‑D710GA/GE.
◆ MCP‑6A cannot read DTMF memory and other menu settings,