Kenwood TM-D710GE - Manual (Page 66)

62
07 EchoLink
Adjusting Transmit Level
Adjust the level of the transmit audio that is sent from the microphone to the test server.
Select “Adjust Sound Device” > “Recording...” from the Tools pulldown menu.
Fig. 7-23 Transmit Level Menu Selection
To transmit, use the “Transmit” button on the EchoLink software screen or the [Space] key on your computer keyboard.
Press the “Transmit” button or [Space] key once to activate the transmit mode; press it again to return to receive mode.
Fig. 7-24 Adjusting Transmit Level
While transmitting, speak into the microphone using a normal level of voice. After returning to receive, your spoken
audio will be repeated back by the test server. Adjust the microphone level control until the returned audio sounds best.
Transmit to the test server and listen to the returned audio a couple of times. When you have completed setting the input
level, press the “Disconnect” button on the EchoLink software screen to disconnect from the test server.
Connecting with a Station
Fig. 7-25 Connecting with a Station
Connected stations are listed in the Station List of the Index View tab on the EchoLink software screen. The stations
are listed in order of repeater stations, link stations, single user stations (PC users) and conferences in the chart. First,
choose a single user station and connect to it. If connecting to a repeater station, link station or conference, before
pressing the space bar to transmit, monitor sufficiently to understand who else may already be connected.