Kenwood TM-D710GE - Manual (Page 26)

22
03 GPS
To delete the log data, you can from log memory screen. Log data will be deleted when you select [ALLCLR] key, a
confirmation message is displayed, select the [MHz] key.
Fig. 3-21 Log Data Deletion Screen
You can set whether or not the log is overwritten when the log memory becomes full.
Selecting ON in Menu 502 (GPS – TRACK LOG – WRAP WHEN FULL) will allow old data to be overwritten with new
data. It is displayed as “OVERWRITING” thereafter.
Selecting OFF will display “LOG FULL !!” when the memory becomes full and new data will no longer be stored.
Fig. 3-22 Menu 502 (TRACK LOG – WRAP WHEN FULL)
“Wrap When Full”
is active
“Wrap When Full”
is inactive
Fig. 3-23 Log Memory Screen (OVERWRITING)
Fig. 3-24 LOG FULL Screen