Kenwood TM-D710GE - Manual (Page 40)

36
05 APRS in Action
• “-” : Minus Shift (A default offset frequency is applied.)
• “+500” : Plus Shift, 5 MHz Offset (“+5000kHz” is also available)
• “-060”: Minus Shift, 600 kHz Offset (“-0600kHz” is also available)
The value of the Offset shall be a 3-digit numeric. (x 10kHz/ 50kHz step)
Note:
◆ For detailed information on the QSY Function format, refer to the following link ( http://aprs.org/info/freqspec.txt ). The
TM‑D710 transceiver complies with the standard which was proposed by Bob Bruninga, WB4APR.
Configuration Examples:
(Insert one space after the frequency before entering Wide/Narrow, Tone/CTCSS/DCS and Shift/Offset.)
• “446.100MHz”: Voice frequency configured for 446.100 MHz, Wide, Tone = None, Simplex
• “446.100MHz T071”: Voice frequency configured for 446.100 MHz, Wide, Tone of 71.9 Hz, Simplex
• “446.100MHz t071”: Voice frequency configured for 446.100 MHz, Narrow, Tone of 71.9 Hz, Simplex
• “446.100MHz C100” : Voice frequency configured for 446.100 MHz, Wide, CTCSS of 100 Hz, Simplex
• “446.100MHz c100”: Voice frequency configured for 446.100 MHz, Narrow, CTCSS of 100 Hz, Simplex
• “446.100MHz D023”: Voice frequency configured for 446.100 MHz, Wide, DCS 023, Simplex
• “446.100MHz d023”: Voice frequency configured for 446.100 MHz, Narrow, DCS 023. Simplex
• “446.100MHz tOFF”: Voice frequency configured for 446.100 MHz, Narrow, Tone = None, Simplex
• “146.850MHz” : Voice frequency configured for 146.850 MHz, Wide, Tone = None, Minus Shift, 600 kHz Offset (TM-D710A/
GAs’ Auto Repeater Offset may work)
• “444.750MHz TOFF +”: Voice frequency configured for 444.750 MHz, Wide, Tone = None, + Shift, Offset = default on UHF
band (5)
• “146.850MHz T131 -060”: Voice frequency configured for 146.850 MHz, Wide, Tone = 131.8 Hz, - Shift, 600 kHz offset
• “146.850MHz T131 -0600kHz”: Voice frequency configured for 146.850 MHz, Wide, Tone = 131.8 Hz, - Shift, 600 kHz offset,
• “-0600kHz”, 600kHz offset: The last digit “0” is ignored by the TM-D710A/GA, it’s just for easier understanding for operators.
• “444.7625MHz tOFF +”: Voice frequency configured for 444.7625 MHz, Narrow, Tone = None, +Shift, Offset = 5 MHz (Default
value on UHF band)
• “444.7625MHz t131 +4MHz”: Voice frequency configured for 444.7625 MHz, Narrow, Tone = 131.8 Hz, +Shift, Offset = 5 MHz
(Default offset on UHF band), “4MHz” is not allowed and it results in a syntax error for TM-D710A/GA so that the default offset
5 MHz (K‑type) is applied instead.
Fig. 5-6 Status Text 5
Fig. 5-7 Status Text 2 Input Example