Sound, Setting the aprs channel, Sound setting the aprs channel – Kenwood TM-D710GE User Manual
Page 17
Advertising
13
Preparations for Using APRS 02
Set WIDE1‑1.
Fig. 2-17 Selecting “WIDE1‑1” in Menu 612
Set the number of packet hops.
Fig. 2-18 Selecting “TOTAL HOPS” in Menu 612
SOUND
Select Menu 624 (APRS – SOUND) and configure the APRS TX/RX beep sound and APRS voice announce (when
using an optional VGS‑1 unit).
Fig. 2-19 Menu 624 (APRS – SOUND)
Setting the APRS Channel
Example:
Configure a frequency of 144.390 MHz. Refer to Fig. 2‑20 Operating Frequency.
Fig. 2-20 Operating Frequency
Advertising