Setting audio levels, Adjusting receive volume – Kenwood TM-D710GE User Manual
Page 65
![background image](/manuals/412269/65/background.png)
61
EchoLink 07
Setting Audio Levels
Before starting to make QSOs, first connect to the Test Server and configure the correct receive volume.
Fig. 7-21 Connecting to EchoLink Test Server
There are two ways to connect to the Test Server as follows:
• Select “Connect to Test Server” from the Station pulldown menu.
• Select the *ECHOTEST* conference and click the “Connect” button (upper left corner of screen).
“Connecting to *ECHOTEST*...” will appear. Once connected, you will hear an announcement from the test server that
begins: “Welcome to the EchoLink Test Server...”.
Adjusting Receive Volume
Adjust the receive volume of the announcement audio from the test server.
Select “Adjust Sound Device” > “Playback...” from the Tools pulldown menu.
Fig. 7-22 Receive Volume Menu Selection
Adjust the appropriate volume control using the test server announcement.