Kenwood TM-D710GE - Manual (Page 74)

70
07 EchoLink
Select the RTS radio button in the PTT Activation frame. The “Serial Port” will be the same port as configured in the RX
Ctrl tab. It is not necessary to check the 9600bps or Key PTT on Local Transmit checkbox. Next, click the DTMF tab.
Fig. 7-39 Sysop Setup Window: DTMF Tab
Select the Internal radio button in the DTMF Decoder frame. In order for you to administer your link station, we
recommend that you input a DTMF command for LinkDown and LinkUp for the EchoLink server. Keep these commands
private to prevent any unauthorized person other than the link station manager from gaining administrative control of the
station. Click the Ident tab.
Fig. 7-40 Sysop Setup Window: Ident Tab
Configure in the Station Identification frame the type of station ID that will be automatically transmitted for identification
purposes. Choose the correct form of over‑the‑air legal ID for your local area. The callsign entered here does not
necessarily need to match the callsign used for your EchoLink login. If the “Spoken Voice” radio button is selected, the
EchoLink software uses speech synthesis to announce the station callsign. If the “Morse” radio button is selected, an ID
will be sent by Morse code.