Kenwood TM-D710GE - Manual (Page 69)

65
EchoLink 07
Configuring EchoLink Software for a Link Station
If your computer is already configured for use in Single User mode of EchoLink, you can easily set up a link station.
Select “Setup...” from the Tools pulldown menu to open the System Setup window.
Fig. 7-27 System Setup Window
In the My Station tab, change the configuration in the Mode frame from “Single‑User” to “Sysop”. That is, select the
Sysop radio button. Click the “Change Callsign” button.
Fig. 7-28 Callsign Change Confirmation