Kenwood TM-D710GE - Manual (Page 25)

21
GPS 03
“DISTANCE” records the log entry after a transceiver leaves exceeding the preconfigured distance from the point where
the log was recorded last. The value of Distance can be configured in the range from 0.01 to 9.99. The unit of DISTANCE
can be selected from km, mile and nm in DISPLAY UNIT 1 (Menu No. 626) in the APRS menu.
Fig. 3-17 If 0.01 miles are configured for Distance
Configuring BEACON enables recording the log immediately after a BEACON is transmitted each time. Using
SmartBeaconing in conjunction enables more efficient logging at a turn in the road.
Fig. 3-18 Normal Logging Method
Fig. 3-19 During the Use combined with SmartBeaconing
Memory usage for logging can be viewed in the Log Memory screen. The Log Memory screen is the 2nd page from the
Latitude longitude, Time, Altitude, Travel direction, Speed,Grid square locator, PTT frequency screen to be accessed by
repeatedly pressing the [→] key.
Fig. 3-20 Log Memory Screen