Goulds Pumps CV 3196 i-FRAME - IOM - Manual (Page 16)

Part description CV 3196
3196
3796
HT 3196
CV 3196
LF 3196
3198
NM 3196
Casing Impeller Cover Power end
Figure 6: CV 3196 part description
This table describes the pump casing parts.
Table 3: Casing
Part Description
Discharge Tangential with optional Connections for venting, flushing, and cleaning out solids.
Gasket Fully confined
Mounting method Integral foot support for maximum resistance to misalignment distortion due to
piping loads.
Standard flange ANSI class 150 flat-face serrated flange
Impeller
The impeller is
• fully open and recessed from the casing
• equipped with curved vanes
• screwed onto the shaft
The threads are sealed from the pumped liquid by a Teflon O-ring.
Product Description
14 Model CV 3196 i-FRAME Installation, Operation, and Maintenance Manual