Disassemble the power end ( xlt-i and i17 ) – Goulds Pumps CV 3196 i-FRAME - IOM User Manual

Page 82

Advertising
background image

11. Remove the O-rings (497F and 497G) if it is necessary.

Labyrinth oil-seal O-rings are part of the 3196 maintenance kits, and they are sold separately.

134

497G

332A

497F

Disassemble the power end ( XLT-i and i17 )

1. Remove the bearing frame from the frame foot (241) using the frame-foot bolts (370F).

228A

241

370F

370D

423

134

370C

2. Remove the clamp screws (370C) and back off the jam nuts (423).
3. Tighten the jack screws (370D) evenly to move the bearing housing (134) out of the bearing frame

(228A).

4. Remove the shaft assembly from the bearing frame (228A).
5. Remove the jack screws (370D), the nuts (423), and the bearing housing O-ring.
6. Remove the inboard bearing (168A).

122

168A

248A

112A

136

382

253B

7. Remove the bolts (371C), the bearing end cover (109A), and the gasket (360C).
8. Remove the outboard labyrinth oil seal (332A) from the end cover (109A).

Maintenance

80

Model CV 3196 i-FRAME Installation, Operation, and Maintenance Manual

Advertising