Goulds Pumps CV 3196 i-FRAME - IOM - Manual (Page 91)

444
Figure 24: Dynamic-seal backplate
184
Figure 25: TaperBore TM Plus
Bearings inspection
Condition of bearings
Do not reuse bearings. The condition of the bearings provides useful information on operating conditions
in the bearing frame.
Checklist
Perform these checks when you inspect the bearings:
• Inspect the bearings for contamination and damage.
• Note any lubricant condition and residue.
• Inspect the ball bearings to see if they are loose, rough, or noisy when you rotate them.
• Investigate any bearing damage to determine the cause. If the cause is not normal wear, correct the
issue before you return the pump to service.
Maintenance
Model CV 3196 i-FRAME Installation, Operation, and Maintenance Manual 89