MSI X2-109 v1 - Manual (Page 106)

7-16 Configuration
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
7.6 Saving a Storage Configuration to Disk
You can save an existing controller configuration to a file so you can
apply it to another controller. To save a configuration file, follow these
steps:
1. Select a controller icon in the left panel of the MegaRAID Storage
Manager window.
2. On the menu bar, select Operations -> Advanced Operations ->
Configuration -> Save Configuration.
The Save dialog box appears.
3. In the Save dialog box, type a name for the configuration file, or
accept the default name (hostname.cfg).
4. Click Save to save the configuration file.
7.7 Clearing a Storage Configuration from a Controller
You can use the Add New Configuration option to add a new storage
configuration while keeping the existing configuration. Alternatively, you
can clear the existing storage configuration from a controller and then
create a totally new configuration or load a previously saved
configuration file.
Caution: Before you clear a configuration, be sure to save any data
that you want to keep. Clearing a configuration deletes all
data from the disks of the existing configuration. Be sure
that the operating system is not installed on this
configuration.
To clear a configuration from a controller, follow these steps:
1. Select a controller icon in the left panel of the MegaRAID Storage
Manager window.
2. On the menu bar, select Operations -> Advanced Operations ->
Configuration -> Clear Configuration.
A Warning message appears.
3. Click Yes to clear the configuration or No to cancel the operation.