Manual configuration – defining a virtual disk – MSI X2-109 v1 User Manual
Page 99
Creating a New Storage Configuration
7-9
Version 2.0
Copyright © 2006 by LSI Logic Corporation. All rights reserved.
Note:
To remove a single drive from a proposed new array, select
the drive icon in the right panel and click the Left Arrow
button.
3.
Click Next.
The next Configuration Wizard window appears, as shown in
Figure 7.6
Manual Configuration – Defining a Virtual Disk
The Arrays with Free Space menu lists the new array that you just
defined, plus any existing arrays with holes (free space) that could
be used for a new configuration.
4.
From the Arrays with Free Space menu, select the array to use for
the new virtual disk.
5.
In the right panel, select RAID 0 as the RAID level.
6.
(Optional) Set Size (in MB) to a lower number if you do not want to
use the entire available capacity for the new virtual disk.
7.
(Optional) Change the other Virtual Disk Properties, if necessary. For
more information, see