MSI X2-109 v1 - Manual (Page 67)

Logical Drive Commands 4-15
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
4.8.4 Manage Consistency Check
Use the command in Table 4.23 to manage a data consistency check
(CC) on the logical drives for the selected adapter(s).
Note: In all operating system environments except DOS, the OS
driver starts the consistency check when this command is
issued. In DOS, however, there is no OS driver, so the
MegaCLI CT just marks the drives as needing a
consistency check. The consistency check actually starts
when the driver loads.
4.8.5 View Ongoing Background Initialization
Use the command in Table 4.24 to view ongoing background initialization
of the selected logical drives, after the -LDInit command has been
issued to start the initialization. This function completes only when all
Table 4.22 Manage Logical Drive Initialization
Syntax CmdTool –LDInit –Start [Fast | Full] |-Abort|–ShowProg|-ProgDsply
-Lx|-L0,1,2|-Lall -aN|-a0,1,2|-aALL
Description Allows you to select the following actions for logical drive initialization:
• -Start: Starts the initialization (writing 0s) on the logical drive(s) and displays
the progress (this is optional). The fast initialization option initializes the first
100 Mbytes on the logical drive. The full option allows you to initialize the entire
logical drive.
• -Abort: Aborts the ongoing initialization on the LD(s).
• -ShowProg: Displays the snapshot of the ongoing initialization, if any.
• -ProgDsply: Displays the progress of the ongoing initialization until at least one
initialization is completed or a key is pressed.
Table 4.23 Manage Consistency Check
Syntax CmdTool –LDCC –Start|-Abort|–ShowProg|-ProgDsply –Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
Description Allows you to select the following actions for a data consistency check:
• -Start: Starts a CC on the logical drive(s), then displays the progress (optional)
and time remaining.
• -Abort: Aborts an ongoing CC on the logical drive(s).
• -ShowProg: Displays a snapshot of an ongoing CC.
• -ProgDsply: Displays ongoing CC progress until at least one CC is completed
or a key is pressed.