MSI X2-109 v1 - Manual (Page 81)

Installation 5-7
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
Be sure to include a space in front of the IP address, as shown in the
example.
5.3.3 Linux Error Messages
One or more of the following messages may appear while you are
installing MegaRAID Storage Manager software on a Linux system:
•
More than one copy of MegaRAID Storage Manager software has
been installed.
This message indicates that the user has installed more than one
copy of MegaRAID Storage Manager software. (This can be done by
using the rpm-force command to install the rpm file directly, which
is not recommended, instead of using the install.sh file.) In such
cases, the user must uninstall all the rpm files manually before
installing MegaRAID Storage Manager software with the procedure
listed previously.
•
The version is already installed.
This message indicates that the version of MegaRAID Storage
Manager software you are trying to install is already installed on the
system.
•
The installed version is newer.
This message indicates that a version of MegaRAID Storage
Manager software is already installed on the system, and it is a
newer version than the version you are trying to install.
•
Exiting installation.
This is the message that appears when the installation is complete.
•
RPM installation failed.
This message indicates that the installation failed for some reason.
Additional message text explains the cause of the failure.