MSI X2-109 v1 - Manual (Page 97)

Creating a New Storage Configuration 7-7
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
3. Select a maximum number of virtual disks to be created. The
Configuration Wizard may not be able to create as many virtual disks
as you want, depending on the current configuration and the number
of virtual disks that have already been created.
4. Click Next to continue to the next window, as shown in Figure 7.4 .
Figure 7.4 Second Guided Configuration Screen
5. Change the default volume parameters in this window, if needed.
In the top section of the window you can specify the number of virtual
disks to create. You can also choose to use less than the full
capacity of this array for the virtual disk(s). (You could do this to
leave capacity available for other virtual disks that you create later.)
To learn about the Stripe Size and other virtual disk parameters, see
Section 7.1.1, “Understanding Virtual Disk Parameters,” page 7-3 .
6. Click Next to continue to the next window.
7. Check the configuration that you have just defined. If it is acceptable,
click Finish. If you want to change something, click Back to return
to the previous windows.