Chapter 4 megacli command tool, Chapter 4, megacli command tool – MSI X2-109 v1 User Manual
Page 53
Embedded MegaRAID Software User’s Guide
4-1
Version 2.0
Copyright © 2006 by LSI Logic Corporation. All rights reserved.
Chapter 4
MegaCLI Command
Tool
The MegaCLI Command Tool (CT) is a command line interface
application that you can use to configure and maintain storage
configurations created with Embedded MegaRAID Software.
Note:
The MegaCLI CT utility runs in the Microsoft
®
Windows
®
and Linux
®
environments. For DOS, the utility is called
MegaDCLI CT and it supports a subset of the full command
set.
This chapter has the following sections:
•
Section 4.1, “MegaCLI CT Overview”
•
Section 4.2, “Exception Handling”
•
Section 4.3, “Command Line Abbreviations and Conventions”
•
Section 4.4, “Adapter Commands”
•
•
Section 4.6, “Event Log Commands”
•
Section 4.7, “Configuration Commands”
•
Section 4.8, “Logical Drive Commands”
•
Section 4.9, “Physical Drive Commands”
•