MSI X2-109 v1 - Manual (Page 107)

Adding a Saved Storage Configuration 7-17
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
7.8 Adding a Saved Storage Configuration
When you replace a controller, or when you want to duplicate an existing
storage configuration on a new controller, you can add a saved
configuration to the controller.
Caution: When you add a saved configuration to a replacement
controller, be sure that the number and size of the physical
disks connected to the controller are exactly the same as
when the configuration was saved.
To add a saved configuration, follow these steps:
1. Select a controller icon in the left panel of the MegaRAID Storage
Manager window.
2. On the menu bar, select Operations -> Advanced Operations ->
Configuration -> Add Saved Configuration.
A Warning message appears.
3. Click Yes.
4. When the Open dialog box appears, select the configuration file, and
click Open.
5. View the configuration detail, then select Apply.
6. Confirm the new configuration when prompted.