MSI X2-109 v1 - Manual (Page 19)

Embedded MegaRAID Software Features 1-3
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
•
Support for Post Memory Management (PMM): Specification v1.01,
November 21, 1997
•
Industry-standard EBDA
•
POST and run-time BIOS support for device insertion and removal
•
Support for Stop On Error during boot-up
The following features are supported by the BIOS and the Ctrl-M
Configuration Utility:
•
Automatic resumption of rebuilding, Check Consistency, full
initialization, and background initialization (BGI)
•
Global hotspare support
•
Soft Bad Block Management (SBBM) support
•
Support for RAID levels 0, 1, 5, and 10
•
Support for auto rebuild
•
Support for up to eight physical drives and eight logical drives
•
Stripe size of 64 Kbytes only
•
Support for Disk Coercion, with options None, 128 Mbytes, and
1 Gbyte
1.1.3 Ctrl-M Configuration Utility Features
The Ctrl-M Configuration Utility supports the following features:
•
Ability to select a logical drive as boot device (by default, logical
drive 0 is the boot drive)
•
Support to disable/enable BIOS boot support
•
Hot Auto Rebuild (during a hot plug event or when the user forces
the physical drive offline)
•
Hot Plug support (drive insertion and removal)
•
Support for array cache setting (RAID 10 volume is considered as a
single array, though it may have 2, 3, or 4 spans)
•
Support for >2 terabyte logical drives
•
Support for random deletion of logical drives