MSI X2-109 v1 - Manual (Page 30)

2-4 Driver Installation
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
Then press Enter.
You are prompted to enter the name of the boot image file.
6. Type the following:
dud.img
Press Enter.
You are prompted for the target drive diskette.
7. Insert a floppy diskette into the floppy drive and type:
A:
Then press Enter.
8. Press Enter again to start copying the file to the diskette.
9. After the command prompt returns and the floppy disk drive LED
goes out, remove the diskette.
10. Label the diskette with the image name.
2.2.2.2 Preparing Installation Disks with the Linux Operating System
Under Red Hat Linux and SuSE Linux, you can use a driver diskette
utility to create disk images from image files. Perform the following steps
to create the driver update disk:
1. Copy the driver update disk image dud-[driver version].img
to a Linux system.
2. Insert a blank floppy diskette into the floppy drive.
3. Confirm that the files are in the selected directory.
4. Create the driver update diskette using the following command:
dd if=dud-[driver version].img of=/dev/fd0
5. After the command prompt returns and the floppy disk drive LED
goes out, remove the diskette.
6. Label the diskette with the image name.