MSI X2-109 v1 - Manual (Page 33)

Linux Driver Installation 2-7
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
controller without checking the subsystem device or Vendor ID. The
ahci SCSI driver entry is the following:
alias scsi_hostadapter ahci
7. Create a new initrd image for the required kernel.
Red Hat installation uses the mk_initrd command to create an initrd
image. The following command creates an initrd image for the
<kernel version>smp kernel in the boot directory. See the
mk_initrd man page for more information. The command is:
#mkinitrd /boot/initrd<kernel version>smp.img.new
<kernel version>smp
8. Modify the lilo.conf/grub.conf file by adding newly created
initrd(s) as new entries in the /etc/lilo.conf file.
The suggested method is to copy an existing lilo entry in the file and
paste it as a new one. Then modify its kernel image name, initrd
image name, and label name.
Sample Lilo Entry
image=/boot/vmlinux-<kernel version>smp label=linuxnew
initrd=/boot/initrd-<kernel version>smp.img.new
read-only appended=root=LABEL=/ ”
Sample Grub Entry
title Red Hat Linux (<kernel version> with Megasr
driver)
root (hd0,0)
kernel /vmlinuz-<kernel version> ro root=LABEL=/
initrd /initrd-<kernel version>.img.new
9. Update the boot loader. If the boot loader is Lilo, run the lilo
command to update the boot loader. The lilo command is:
#lilo
10. Reboot the system to the new boot loader entry.