MSI X2-109 v1 - Manual (Page 94)

7-4 Configuration
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
7.1.2 Using Auto Configuration
Auto Configuration is the quickest and simplest way to create a new
storage configuration. When you select Auto Configuration mode on the
first Configuration Wizard screen, the Configuration Wizard creates the
best configuration possible using the available physical disks.
Figure 7.2 shows the Auto Configuration screen.
Figure 7.2 Auto Configuration Screen
Follow these steps to create a new storage configuration in Auto
Configuration mode:
1. Select a redundancy option from the drop-down menu at the bottom
of the Auto Configuration window:
– No Redundancy: The new configuration will have no data
redundancy (RAID 0). If a physical disk in the configuration fails,
all data will be lost.