Chapter 3 megaraid bios configuration utility, Chapter 3, megaraid bios configuration utility – MSI X2-109 v1 User Manual

Page 35

Advertising
background image

Embedded MegaRAID Software User’s Guide

3-1

Version 2.0

Copyright © 2006 by LSI Logic Corporation. All rights reserved.

Chapter 3
MegaRAID BIOS
Configuration Utility

The MegaRAID BIOS Configuration Utility (CU) is used to configure disk
arrays and logical drives and to do other configuration tasks in a pre-boot
environment. This chapter has the following sections:

Section 3.1, “Performing a Quick Configuration”

Section 3.2, “Configuring Arrays and Logical Drives”

Section 3.3, “Setting the Hard Disk Write Cache and Read Ahead
Policies”

Section 3.4, “Rebuilding a Drive”

Section 3.5, “Hot Plug Support”

Section 3.6, “Checking Data Consistency”

Section 3.7, “Viewing and Changing Device Properties”

Section 3.8, “Forcing Drives Online or Offline”

Section 3.9, “Configuring a Bootable Logical Drive”

Section 3.10, “Deleting a Logical Drive”

Section 3.11, “Clearing a Storage Configuration”

Advertising