Toshiba Magnia 3310 - Manual (Page 155)

Installing and Removing Hardware
Expansion cards
137
Do not pull the cable. Grasp the connector and pull it straight
out.
Disconnecting the SCSI cable
NOTE: Install cache memory in the RAID controller AF200C
before installing the RAID controller AF200C into the system.
See “RAID cache memory Installation Guide.”
To remove cache memory, push the two pins to the outside.
Grasp both ends of the cache memory and pull it out.
To install cache memory, push it in carefully until secured by
the pins.
The RAID controller AF200C’s cache memory size can be
replaced. Two cache memory sizes are available for the
RAID controller AF200C (128/256 MB).
channel A
channel B