Toshiba Magnia 3310 - Manual (Page 87)

Installing and Removing Hardware
Cooling fan
69
Connectors on the motherboard
NOTE: When connecting a standard or redundant fan mod-
ule, however, be careful not to connect its cable to an incor-
rect terminal.
In this server system, a combination of standard intake and
exhaust fan modules is referred to as “standard fan set 1,”
and a combination of redundant intake and exhaust fan mod-
ules as “redundant fan set 1.”
8 Loosen the screw of the redundant exhaust fan module spacer,
and remove the spacer.
Removing the spacer
FAN2-R
FAN2